WTS Template

Admin Systems Access via SSH Client Version 5.x

Download and install the Admin Systems client software (SAPGUI) as usual. These instructions assume the AMS SAPGUI 4.6D client install.
Install the SSH Client software version 5.x (www.datafellows.com)
Run F-Secure SSH Client and choose File>>Profiles>>Edit Profiles
- Configure the "Quick Connect" profile as follows:
  1. On the Connection Tab fill in the following:
  2. Host Name: splash.utcs.utoronto.ca
  3. User Name: your securid username
  4. Make sure the Compression box is checked
  5. Make sure the Autoconnect on Open box is checked
  1. On the Local Forwardings Tab click Add and fill in the following on the Add New Local Tunnel dialog:
  2. Source Port: 3205
  3. Destination Host: localhost
  4. Destination Port: 3205
  5. Application to Start: C:\Program Files\SAPPc\sapgui\sapgui.exe localhost 05
  Click OK to save the local forwarding and OK to save the Quick Connect profile. Exit the SSH client.
  When you launch the F-Secure SSH client again it should automatically connect and should prompt you for your password.
  Your first connection should result in the following dialog appearing:
  Select Accept and Save
When prompted for a password you should use your SecurID card to generate a passcode. A valid userid and password combination will result in a connection opening and the Admin System logon screen to appear. The following screens may be helpful in checking your configuration.